615 hot melt film

In order to obtain good adhesion for digital product display screen, touch screen and TP lens, appropriate JSW-615 hot melt film must be selected, and the surface of the adhered material must be treated correctly. The adhesion technology is very critical. The stress form of the glued joint is the basis for design and glue selection. The shear and tensile strength of 615 hot melt film is much higher than that of peeling, uneven tearing, impact and bending. 615 hot melt film is not a general structural adhesive. The wet-set adhesive itself is flexible in material and small in hardness. 615 hot melt film is suitable for structural adhesives that can withstand stretching and shearing of adherends. The above is a brief introduction of 615 hot melt film. For detailed data, please go to the download window of Jin Shengwei's official website materials. The following is informal information on 615 hot melt film for reference only.


Most kinds of adhesives for electronic engineering structures are reactive and can be cured by wet chemical reaction at room temperature without solvent. At present, there is no recognized agreement on the definition and evaluation standard of 615 hot melt film at home and abroad, and the views of 615 hot melt film industry are also different. When people classify and define structural adhesive and non-structural adhesive, 615 hot melt film used for bonding components that bear strong parts is generally called structural adhesive, and adhesive used for bonding components that do not need to bear strong parts is called non-structural adhesive. However, since the same 615 hot melt film can be used in both the strong and non-strong parts, the stricter method is to define and classify the adhesive according to its performance.
Most kinds of adhesives for electronic engineering structures are reactive and can be cured by wet chemical reaction at room temperature without solvent. At present, there is no recognized agreement on the definition and evaluation standard of 615 hot melt film at home and abroad, and the views of 615 hot melt film industry are also different. When people classify and define structural adhesive and non-structural adhesive, 615 hot melt film used for bonding components that bear strong parts is generally called structural adhesive, and adhesive used for bonding components that do not need to bear strong parts is called non-structural adhesive. However, since the same 615 hot melt film can be used in both the strong and non-strong parts, the stricter method is to define and classify the adhesive according to its performance.
Over the past few years, JSW Company has invested 120 million yuan in 615 hot melt film research, improved the quality inspection conditions, strictly controlled the quality, and continuously improved the environmental protection technical standards of 615 hot melt film products. JSW Company has always adhered to the development requirements of "health and environmental protection" in terms of raw material selection and control, formulation optimization, process equipment modification, technology research and development, etc. JSW Company has achieved fruitful results in the field of technological innovation. It has formed the only complete technical system for 615 hot melt film production and construction with independent intellectual property rights. It has dozens of patented technologies, especially the company's 615 hot melt film dispensing new technology, which has the world's leading level and won the world patent and invention gold medal.